In order to ensure the safety of lifting pulley work, we must follow the operation requirements when using it, the following is our staff summary of the product use of the seven requirements, we will learn together.
In order to ensure the safety of lifting pulley work, we must follow the operation requirements when using it, the following is our staff summary of the product use of the seven requirements, we will learn together.
Requirements 1, the pulley must be checked before the work, if it is just after the overhaul of the pulley or has not been used new pulley to carry out rated load test, to be confirmed without error, before putting into use.
Requirements two, before the use of the rated weight of the pulley, but also to determine the weight of the cargo, not overload, if unable to find out the lifting weight, can be measured by other tools, must not overload work.
Requirements 3. Before use, the lifting tackle should check that all its parts are in good condition, and can not be used until the assembly is found to be correct.
Requirements four, the selection of steel wire rope must meet the requirements, the steel wire rope and pulley groove Angle can not be too large, to assemble the steel wire rope in accordance with the requirements of the provisions, so in the process of lifting goods to ensure safety.
Requirement 5. If it is working at altitude or when the force direction changes greatly, it is not suitable to choose the hook type pulley. If it is the hook type, the mouth must be sealed. This can prevent the occurrence of pulley decoupling due to excessive operation force.
Requirement vi. During the service period, lubricating oil should be added to the pulley and shaft regularly to reduce the wear degree of bearings, which can effectively extend the service life of the pulley.
Requirements seven, when the lifting tackle is dismantled, do not throw, so that can not only prevent the staff, but also to protect the lifting tackle.
The above is the use of lifting pulley when we need to follow the seven use requirements, only in the work in strict accordance with the requirements to operate, in order to provide a guarantee for the safety of work and the intact pulley.
In order to ensure the safety of lifting pulley work, we must follow the operation requirements when using it, the following is our staff summary of the product use of the seven requirements, we will learn together.
Requirements 1, the pulley must be checked before the work, if it is just after the overhaul of the pulley or has not been used new pulley to carry out rated load test, to be confirmed without error, before putting into use.
Requirements two, before the use of the rated weight of the pulley, but also to determine the weight of the cargo, not overload, if unable to find out the lifting weight, can be measured by other tools, must not overload work.
Requirements 3. Before use, the lifting tackle should check that all its parts are in good condition, and can not be used until the assembly is found to be correct.
Requirements four, the selection of steel wire rope must meet the requirements, the steel wire rope and pulley groove Angle can not be too large, to assemble the steel wire rope in accordance with the requirements of the provisions, so in the process of lifting goods to ensure safety.
Requirement 5. If it is working at altitude or when the force direction changes greatly, it is not suitable to choose the hook type pulley. If it is the hook type, the mouth must be sealed. This can prevent the occurrence of pulley decoupling due to excessive operation force.
Requirement vi. During the service period, lubricating oil should be added to the pulley and shaft regularly to reduce the wear degree of bearings, which can effectively extend the service life of the pulley.
Requirements seven, when the lifting tackle is dismantled, do not throw, so that can not only prevent the staff, but also to protect the lifting tackle.
The above is the use of lifting pulley when we need to follow the seven use requirements, only in the work in strict accordance with the requirements to operate, in order to provide a guarantee for the safety of work and the intact pulley.
