Hook is a kind of connecting device in lifting machinery. Is a more commonly used component, with similar functions, there are rings, suction cups, clamps and forks and so on. Lifting cups, tongs and forks can be used as special lifting devices on cranes for a long time. Auxiliary lifting devices are temporarily suspended on the hook for temporary use. They are commonly used in various types of warehouse work.
Hook is a kind of connecting device in lifting machinery. Is a more commonly used component, with similar functions, there are rings, suction cups, clamps and forks and so on. Lifting cups, tongs and forks can be used as special lifting devices on cranes for a long time. Auxiliary lifting devices are temporarily suspended on the hook for temporary use. They are commonly used in various types of warehouse work.
In the use of the lifting device, if the hook is not flexible or in place, the adjusting nut should be checked to see if it is damaged. If it is damaged, it should be replaced; if the transmission mechanism is stuck, lubricating oil should be added to the active connection of the transmission mechanism. If the guide pin is too tight, adjust the nut properly. If the connection is loose and the transmission pipe or other rod parts are deformed, it should be corrected.
For the wire rope on the hanger, the lubricating oil or grease should be removed in time, especially at the bend of the wire rope. The hook shall be inspected at least once every three months in normal use, and no crack or serious deformation is required. Pay attention to whether the rope is loose and seriously worn. The tension spring shall not exceed the rated weight of the lifting device. In the process of lifting, it should be operated stably to avoid deformation due to the influence of tools, cranes or other equipment.
Hook is a kind of connecting device in lifting machinery. Is a more commonly used component, with similar functions, there are rings, suction cups, clamps and forks and so on. Lifting cups, tongs and forks can be used as special lifting devices on cranes for a long time. Auxiliary lifting devices are temporarily suspended on the hook for temporary use. They are commonly used in various types of warehouse work.
In the use of the lifting device, if the hook is not flexible or in place, the adjusting nut should be checked to see if it is damaged. If it is damaged, it should be replaced; if the transmission mechanism is stuck, lubricating oil should be added to the active connection of the transmission mechanism. If the guide pin is too tight, adjust the nut properly. If the connection is loose and the transmission pipe or other rod parts are deformed, it should be corrected.
For the wire rope on the hanger, the lubricating oil or grease should be removed in time, especially at the bend of the wire rope. The hook shall be inspected at least once every three months in normal use, and no crack or serious deformation is required. Pay attention to whether the rope is loose and seriously worn. The tension spring shall not exceed the rated weight of the lifting device. In the process of lifting, it should be operated stably to avoid deformation due to the influence of tools, cranes or other equipment.
